Difference between revisions of "Test System Release Notes"

From OpenMotics
Jump to navigation Jump to search
Line 4: Line 4:
  
 
See [[Test System]] to have more detailed information.
 
See [[Test System]] to have more detailed information.
 +
 +
== V1.0.18 ==
 +
Date: 24/08/2021
 +
 +
=== Resolved bugs ===
 +
*
 +
 +
=== Added functionality ===
 +
* CLI Instruction "sr" has been added:
 +
** This instruction reads the serial number only without doing any other tests
 +
** In this version, this instruction is only supported for the Brain and Brain+
 +
* CLI Instruction "sw" has been added:
 +
** This instruction writes the serial number only without doing any other tests
 +
** In this version, this instruction is only supported for the Brain and Brain+
  
 
== V1.0.17 ==
 
== V1.0.17 ==

Revision as of 15:48, 24 August 2021

General

The OpenMotics Test System for GEN3 hardware has firmware running on the PCB of the CAN Control that acts as Test Controller. Below, you can find the different release of this firmware.

See Test System to have more detailed information.

V1.0.18

Date: 24/08/2021

Resolved bugs

Added functionality

  • CLI Instruction "sr" has been added:
    • This instruction reads the serial number only without doing any other tests
    • In this version, this instruction is only supported for the Brain and Brain+
  • CLI Instruction "sw" has been added:
    • This instruction writes the serial number only without doing any other tests
    • In this version, this instruction is only supported for the Brain and Brain+

V1.0.17

Date: 17/08/2021

Resolved bugs

Added functionality

  • Master Firmware V1.0.107 and higher has modified CAN parameters. This release of the Test firmware has the modified CAN parameters as well.