P1 Module Release Notes

From OpenMotics
Jump to navigation Jump to search


The P1 Module firmware is published as Open Source since firmware release V6.0.x. Below you'll find all the changes since that release.

The firmware updates happening in the Openmotics portal (Settings - Update) contain not only the firmware update of the Master, but also the firmware of other modules as well as the updates for the Beagle Bone Black. All these different firmware updates are assembled in a package which get's a general version number. This version number which you see in the portal is not the same as the Firmware Version of the Master. To check which firmware version is installed on the Master or any other module, in the Openmotics portal, go to Settings - Maintenance and open maintenance mode by pressing the Connect button. Type the instruction firmware version to read the Master Firmware version.


Date: 16/10/2020

Important Notes:

  • V6.x.y only works with Gen 3 hardware

Resolved bugs

Added functionality

  • This release includes the support of all hardware modifications (OMHPR C-2) including the Front Panel (OMH06 B-1) modifications