Difference between revisions of "Led function"

From OpenMotics
Jump to navigation Jump to search
(Created page with "== Led Function == {| class="wikitable" width="60%" ! width="5%"|Led function !Description |- !<div align="center">0</div> |If the linked output if Off, switch off led, if the...")
 
 
(One intermediate revision by the same user not shown)
Line 25: Line 25:
 
|...
 
|...
 
|-
 
|-
!<div align="center">8</div>
+
!<div align="center">31</div>
|RS485 error: Output Device is not responding. ID of the device can be found in ID0..ID3
+
|If the linked output if Off, switch off led, if the linked output is on, Fast blinking Led at brightness Level 16 (Max brightness)
 
|-
 
|-
!<div align="center">9</div>
+
!<div align="center">32</div>
|RS485 error: Output Device is responding but not with “OK” message or wrong module is answering
+
|If the linked output if Off, switch off led, if the linked output is on, Medium blinking Led at brightness Level 1
 
|-
 
|-
!<div align="center">10</div>
+
!<div align="center">33</div>
|RS485 error: Network errors, check termination resistors. ID of the device can be found in ID0..ID3
+
|If the linked output if Off, switch off led, if the linked output is on, Medium blinking Led at brightness Level 2
 
|-
 
|-
!<div align="center">11</div>
+
!<div align="center">...</div>
|<nowiki># of inputs found in the EEPROM of the Master (EEPROM page 0 line 1) are higher than 30 and is not valid. ID0</nowiki>..ID3 = null. Number of input modules is zero now
+
|...
 
|-
 
|-
!<div align="center">12</div>
+
!<div align="center">47</div>
|<nowiki># of outputs found in the EEPROM of the Master (EEPROM page 0 line 1) are higher than 30 and is not valid. ID0</nowiki>..ID3 = null. Number of output modules is zero now
+
|If the linked output if Off, switch off led, if the linked output is on, Medium blinking Led at brightness Level 16 (Max brightness)
 
|-
 
|-
!<div align="center">13</div>
+
!<div align="center">48</div>
|Too many intelligent actions are created, most likely due to a loop. A loop can be caused by using group actions that call themselves
+
|If the linked output if Off, switch off led, if the linked output is on, Slow blinking Led at brightness Level 1
 
|-
 
|-
!<div align="center">14</div>
+
!<div align="center">49</div>
|Unexpected character received (i.e.: a letter where a value was expected)
+
|If the linked output if Off, switch off led, if the linked output is on, Slow blinking Led at brightness Level 2
 
|-
 
|-
!<div align="center">15</div>
+
!<div align="center">...</div>
|Output to switch off is not in a valid range (&lt;239)
+
|...
 
|-
 
|-
!<div align="center">16</div>
+
!<div align="center">63</div>
|Output to switch on is not in a valid range (&lt;239)
+
|If the linked output if Off, switch off led, if the linked output is on, Slow blinking Led at brightness Level 16 (Max brightness)
 
|-
 
|-
!<div align="center">17</div>
+
!<div align="center">64</div>
|Wrong or unrecognized instruction
+
|If the linked output if Off, switch off led, if the linked output is on, Led swinging at brightness Level 1
 
|-
 
|-
!<div align="center">18</div>
+
!<div align="center">65</div>
|Wrong value used in reading the EEPROM
+
|If the linked output if Off, switch off led, if the linked output is on, Led swinging at brightness Level 2
 
|-
 
|-
!<div align="center">19</div>
+
!<div align="center">...</div>
|A value with more than 5 digits is not accepted
+
|...
 
|-
 
|-
!<div align="center">20</div>
+
!<div align="center">79</div>
|Wrong value used in reading the EEPROM
+
|If the linked output if Off, switch off led, if the linked output is on, Led swinging at brightness Level 16 (Max brightness)
 
|-
 
|-
!<div align="center">21</div>
+
!<div align="center">128</div>
|Wrong value used in reading output timer values
+
|If the linked output if On, switch off led, if the linked output is off, Switch Led ON at brightness Level 1
 
|-
 
|-
!<div align="center">22</div>
+
!<div align="center">129</div>
|Wrong value used in writing output timer values
+
|If the linked output if On, switch off led, if the linked output is off, Switch Led ON at brightness Level 2
 
|-
 
|-
!<div align="center">23</div>
+
!<div align="center">...</div>
|Values out of range or wrong number of arguments
+
|...
 
|-
 
|-
!<div align="center">24</div>
+
!<div align="center">143</div>
|Overflow scheduled action queue
+
|If the linked output if On, switch off led, if the linked output is off, Switch Led ON at brightness Level 16 (Max brightness)
 
|-
 
|-
!<div align="center">25</div>
+
!<div align="center">144</div>
|Auto Initialization byte (Page0/Byte14): System is in auto initialization mode, instruction <code>add</code> in CLI mode can’t be used
+
|If the linked output if On, switch off led, if the linked output is off, Fast blinking Led at brightness Level 1
 
|-
 
|-
!<div align="center">26</div>
+
!<div align="center">145</div>
|Duplicate ID found on the network during initialization mode, bus will be reinitialized to solve the problem. User must press the initialization/discovery button on the Module again to initialize the appropriate Module
+
|If the linked output if On, switch off led, if the linked output is off, Fast blinking Led at brightness Level 2
 
|-
 
|-
!<div align="center">27</div>
+
!<div align="center">...</div>
|Wrong CRC received from remote module or CRC information is missing
+
|...
 
|-
 
|-
!<div align="center">28</div>
+
!<div align="center">159</div>
|RS485 error: Output Device configured as Roller/Shutter in [[Large Installation]] mode is responding but not with “OK” message or wrong module is answering
+
|If the linked output if On, switch off led, if the linked output is off, Fast blinking Led at brightness Level 16 (Max brightness)
 +
|-
 +
!<div align="center">160</div>
 +
|If the linked output if On, switch off led, if the linked output is off, Medium blinking Led at brightness Level 1
 +
|-
 +
!<div align="center">161</div>
 +
|If the linked output if On, switch off led, if the linked output is off, Medium blinking Led at brightness Level 2
 +
|-
 +
!<div align="center">...</div>
 +
|...
 +
|-
 +
!<div align="center">175</div>
 +
|If the linked output if On, switch off led, if the linked output is off, Medium blinking Led at brightness Level 16 (Max brightness)
 +
|-
 +
!<div align="center">176</div>
 +
|If the linked output if On, switch off led, if the linked output is off, Slow blinking Led at brightness Level 1
 +
|-
 +
!<div align="center">177</div>
 +
|If the linked output if On, switch off led, if the linked output is off, Slow blinking Led at brightness Level 2
 +
|-
 +
!<div align="center">...</div>
 +
|...
 +
|-
 +
!<div align="center">191</div>
 +
|If the linked output if On, switch off led, if the linked output is off, Slowd blinking Led at brightness Level 16 (Max brightness)
 +
|-
 +
!<div align="center">192</div>
 +
|If the linked output if On, switch off led, if the linked output is off, Led swinging at brightness Level 1
 +
|-
 +
!<div align="center">193</div>
 +
|If the linked output if On, switch off led, if the linked output is off, Led swinging at brightness Level 2
 +
|-
 +
!<div align="center">...</div>
 +
|...
 +
|-
 +
!<div align="center">207</div>
 +
|If the linked output if On, switch off led, if the linked output is off, Led swinging at brightness Level 16 (Max brightness)
 
|-
 
|-
 
|}
 
|}

Latest revision as of 08:24, 7 June 2016

Led Function

Led function Description
0
If the linked output if Off, switch off led, if the linked output is on, Switch Led ON at brightness Level 1
1
If the linked output if Off, switch off led, if the linked output is on, Switch Led ON at brightness Level 2
...
...
15
If the linked output if Off, switch off led, if the linked output is on, Switch Led ON at brightness Level 16 (Max brightness)
16
If the linked output if Off, switch off led, if the linked output is on, Fast blinking Led at brightness Level 1
17
If the linked output if Off, switch off led, if the linked output is on, Fast blinking Led at brightness Level 2
...
...
31
If the linked output if Off, switch off led, if the linked output is on, Fast blinking Led at brightness Level 16 (Max brightness)
32
If the linked output if Off, switch off led, if the linked output is on, Medium blinking Led at brightness Level 1
33
If the linked output if Off, switch off led, if the linked output is on, Medium blinking Led at brightness Level 2
...
...
47
If the linked output if Off, switch off led, if the linked output is on, Medium blinking Led at brightness Level 16 (Max brightness)
48
If the linked output if Off, switch off led, if the linked output is on, Slow blinking Led at brightness Level 1
49
If the linked output if Off, switch off led, if the linked output is on, Slow blinking Led at brightness Level 2
...
...
63
If the linked output if Off, switch off led, if the linked output is on, Slow blinking Led at brightness Level 16 (Max brightness)
64
If the linked output if Off, switch off led, if the linked output is on, Led swinging at brightness Level 1
65
If the linked output if Off, switch off led, if the linked output is on, Led swinging at brightness Level 2
...
...
79
If the linked output if Off, switch off led, if the linked output is on, Led swinging at brightness Level 16 (Max brightness)
128
If the linked output if On, switch off led, if the linked output is off, Switch Led ON at brightness Level 1
129
If the linked output if On, switch off led, if the linked output is off, Switch Led ON at brightness Level 2
...
...
143
If the linked output if On, switch off led, if the linked output is off, Switch Led ON at brightness Level 16 (Max brightness)
144
If the linked output if On, switch off led, if the linked output is off, Fast blinking Led at brightness Level 1
145
If the linked output if On, switch off led, if the linked output is off, Fast blinking Led at brightness Level 2
...
...
159
If the linked output if On, switch off led, if the linked output is off, Fast blinking Led at brightness Level 16 (Max brightness)
160
If the linked output if On, switch off led, if the linked output is off, Medium blinking Led at brightness Level 1
161
If the linked output if On, switch off led, if the linked output is off, Medium blinking Led at brightness Level 2
...
...
175
If the linked output if On, switch off led, if the linked output is off, Medium blinking Led at brightness Level 16 (Max brightness)
176
If the linked output if On, switch off led, if the linked output is off, Slow blinking Led at brightness Level 1
177
If the linked output if On, switch off led, if the linked output is off, Slow blinking Led at brightness Level 2
...
...
191
If the linked output if On, switch off led, if the linked output is off, Slowd blinking Led at brightness Level 16 (Max brightness)
192
If the linked output if On, switch off led, if the linked output is off, Led swinging at brightness Level 1
193
If the linked output if On, switch off led, if the linked output is off, Led swinging at brightness Level 2
...
...
207
If the linked output if On, switch off led, if the linked output is off, Led swinging at brightness Level 16 (Max brightness)