HP Tips & tricks during installation and troubleshooting
Introduction
The HP (Heat Pump) module is made to work in combination OpenMotics. This module will allow to built a full electric solution for Heating and Cooling in combination with a Heatpump. The HP module has following connections:
- 6x NTC (temperature) probe connections
- 4x 230VAC outputs
- 2x Relay outputs (dry contacts)
- 2x 0-10VDC inputs
- 2x 0-10VDC outputs
- 1x Aquastat input
Firmware information
Release notes
The Firmware release notes can be found here: HP Module Release Notes
Eeprom Memory Model
| Location DEC | Location HEX | Description |
|---|---|---|
0
|
0
|
Output Module ID_NE (Module is New "N" or Existing "E") |
1
|
1
|
Output Module ID0 |
2
|
2
|
Output Module ID1 |
3
|
3
|
Output Module ID2 |
4
|
4
|
Output Module ID3 |
20
|
14
|
Sensor Module ID_NE (Module is New "N" or Existing "E") |
21
|
15
|
Sensor Module ID0 |
22
|
16
|
Sensor Module ID1 |
23
|
17
|
Sensor Module ID2 |
24
|
18
|
Sensor Module ID3 |
64
|
40
|
Hardware Version |
65
|
41
|
Firmware Version Major |
66
|
42
|
Firmware Version Minor |
67
|
43
|
Firmware Version Built |
74
|
4A
|
Bootloader Flashmode variable |
75
|
4B
|
Bootloader Timeout value |
99
|
63
|
Sensor Refresh rate: Time (x70ms) between each sensor read (Default ?) |
100
|
64
|
PID1: Temperature Sensor (0-5) linked to this PID routine |
101
|
65
|
PID1: Output (0-7) linked to this PID routine |
102
|
66
|
PID1: PID P (MSB) Parameter |
103
|
67
|
PID1: PID P (LSB) Parameter |
104
|
68
|
PID1: PID I (MSB) Parameter |
105
|
69
|
PID1: PID I (LSB) Parameter |
106
|
6A
|
PID1: PID D (MSB) Parameter |
107
|
6B
|
PID1: PID D (LSB) Parameter |
108
|
6C
|
PID1: PID Ti Parameter -> How often the I PID filter needs to be updated |
109
|
6D
|
PID1: PID I Clamp (MSB) -> Clamp value to avoid windup |
110
|
6E
|
PID1: PID I Clamp (LSB) -> Clamp value to avoid windup |
111
|
6F
|
PID1: PID OUT Clamp (MSB) -> Clamp value Output value |
112
|
70
|
PID1: PID OUT Clamp (LSB) -> Clamp value Output value |
113
|
71
|
PID1: Time (x10ms) between each PID execution (Default ?) |
114
|
72
|
PID1: Enable (==1 without UART debug,==2 with UART debug)/Disable (!=1) PID |
240
|
F0
|
Eeprom Protected Area: Production Year (DEC 0-99) |
241
|
F1
|
Eeprom Protected Area: Production Month (DEC 1-12) |
242
|
F2
|
Eeprom Protected Area: Production Day (DEC 1-31) |
243
|
F3
|
Eeprom Protected Area: Production Company (DEC 0-9) |
244
|
F4
|
Eeprom Protected Area: Serial Number MSB |
245
|
F5
|
Eeprom Protected Area: Serial number LSB |
246
|
F6
|
Eeprom Protected Area: Number of errors found during production testing |
