HP Tips & tricks during installation and troubleshooting

From OpenMotics
Jump to navigation Jump to search

Introduction

The HP (Heat Pump) module is made to work in combination OpenMotics. This module will allow to built a full electric solution for Heating and Cooling in combination with a Heatpump. The HP module has following connections:

  • 6x NTC (temperature) probe connections
  • 4x 230VAC outputs
  • 2x Relay outputs (dry contacts)
  • 2x 0-10VDC inputs
  • 2x 0-10VDC outputs
  • 1x Aquastat input

Firmware information

Release notes

The Firmware release notes can be found here: HP Module Release Notes

Eeprom Memory Model

Location DEC Location HEX Description
0
0
Output Module ID_NE (Module is New "N" or Existing "E")
1
1
Output Module ID0
2
2
Output Module ID1
3
3
Output Module ID2
4
4
Output Module ID3
20
14
Sensor Module ID_NE (Module is New "N" or Existing "E")
21
15
Sensor Module ID0
22
16
Sensor Module ID1
23
17
Sensor Module ID2
24
18
Sensor Module ID3
64
40
Hardware Version
65
41
Firmware Version Major
66
42
Firmware Version Minor
67
43
Firmware Version Built
74
4A
Bootloader Flashmode variable
75
4B
Bootloader Timeout value
240
F0
Production Year (DEC 0-99)
241
F1
Production Month (DEC 1-12)
242
F2
Production Day (DEC 1-31)
243
F3
Production Company (DEC 0-9)
244
F4
Serial Number MSB
245
F5
Serial number LSB
246
F6
Number of errors found during production testing