HP Tips & tricks during installation and troubleshooting
Introduction
The HP (Heat Pump) module is made to work in combination OpenMotics. This module will allow to built a full electric solution for Heating and Cooling in combination with a Heatpump. The HP module has following connections:
- 6x NTC (temperature) probe connections
- 4x 230VAC outputs
- 2x Relay outputs (dry contacts)
- 2x 0-10VDC inputs
- 2x 0-10VDC outputs
- 1x Aquastat input
Firmware information
Release notes
The Firmware release notes can be found here: HP Module Release Notes
Eeprom Memory Model
| Location DEC | Location HEX | Description |
|---|---|---|
0
|
0
|
Output Module ID_NE (Module is New "N" or Existing "E") |
1
|
1
|
Output Module ID0 |
2
|
2
|
Output Module ID1 |
3
|
3
|
Output Module ID2 |
4
|
4
|
Output Module ID3 |
20
|
14
|
Sensor Module ID_NE (Module is New "N" or Existing "E") |
21
|
15
|
Sensor Module ID0 |
22
|
16
|
Sensor Module ID1 |
23
|
17
|
Sensor Module ID2 |
24
|
18
|
Sensor Module ID3 |
240
|
F0
|
Production Year (DEC 0-99) |
241
|
F1
|
Production Month (DEC 1-12) |
242
|
F2
|
Production Day (DEC 1-31) |
243
|
F3
|
Production Company (DEC 0-9) |
244
|
F4
|
Serial Number MSB |
245
|
F5
|
Serial number LSB |
246
|
F6
|
Number of errors found during production testing |
