HP Tips & tricks during installation and troubleshooting

From OpenMotics
Jump to navigation Jump to search

Introduction

The HP (Heat Pump) module is made to work in combination OpenMotics. This module will allow to built a full electric solution for Heating and Cooling in combination with a Heatpump. The HP module has following connections:

  • 6x NTC (temperature) probe connections
  • 4x 230VAC outputs
  • 2x Relay outputs (dry contacts)
  • 2x 0-10VDC inputs
  • 2x 0-10VDC outputs
  • 1x Aquastat input

Firmware information

Release notes

The Firmware release notes can be found here: HP Module Release Notes

Eeprom Memory Model