Difference between revisions of "Energy module front panel LED functionality"
Jump to navigation
Jump to search
| Line 18: | Line 18: | ||
* [1Hz 90%] led is almost constant on but blinks off ones a second : addressmode | * [1Hz 90%] led is almost constant on but blinks off ones a second : addressmode | ||
| − | == voltage 1-3 | + | == voltage 1-3 == |
| + | === not in address mode === | ||
The status of the 3 voltage leds is the same but each for its own voltage channel | The status of the 3 voltage leds is the same but each for its own voltage channel | ||
* [1Hz 10%] led blinks short every second : There is commnication with the the processor who measures the voltage but the voltage level is to low | * [1Hz 10%] led blinks short every second : There is commnication with the the processor who measures the voltage but the voltage level is to low | ||
| Line 24: | Line 25: | ||
* [4Hz 50%] led blinks normal but fast : There is a problem to communicate with the processor who measures the voltage. | * [4Hz 50%] led blinks normal but fast : There is a problem to communicate with the processor who measures the voltage. | ||
| − | == | + | === in address mode === |
The leds represent the address of the module in binary format | The leds represent the address of the module in binary format | ||
see voltage 1-3 in bootloader mode for more info | see voltage 1-3 in bootloader mode for more info | ||
Revision as of 18:12, 19 March 2016
There are 5 leds on the toppanel. The status of those leds depends on there blinking frequency and duty cycle.
explanation per led: [<frequency> <duty cycle>] The one in bold is the default value
Contents
powerled
- [no 100%] led is on : main program
- [1Hz 90%] led blinks every second but almost constant on : bootloader mode
main program
statusled
- [1Hz 10%] led blinks short every second : main process is not yet started, if this stays for a long time there is something wrong to initialize.
- [1Hz 50%] led blinks normal ones a second : main process is running and everything is ok, there is also communication
- [4Hz 50%] led blinks normal but fast : main process is running and all ok, but there is no communication
- [1Hz 90%] led is almost constant on but blinks off ones a second : addressmode
voltage 1-3
not in address mode
The status of the 3 voltage leds is the same but each for its own voltage channel
- [1Hz 10%] led blinks short every second : There is commnication with the the processor who measures the voltage but the voltage level is to low
- [1Hz 90%] led is almost constant on but blinks off ones a second : There is a voltage signal measured on the corresponding voltage channel and the voltage is higher than 50V
- [4Hz 50%] led blinks normal but fast : There is a problem to communicate with the processor who measures the voltage.
in address mode
The leds represent the address of the module in binary format see voltage 1-3 in bootloader mode for more info
bootloader
statusled
- [no 0%] led is off : bootloader is not yet started, if this happen for a long time there is something wrong to initialize.
- [1Hz 50%] led blinks normal ones a second : bootloader is running and there is also communication
- [4Hz 50%] led blinks normal but fast : bootloader is running but there is no communication yet
voltage 1-3
The leds represent the address of the module in binary format [V1 V2 V3]b ex. if V1 is off and V2 and V3 are on -> 011 = address E3
For all addresses above 7, module 8 operation is preformed.
