Decision Types

From OpenMotics
Revision as of 20:00, 28 October 2013 by Pieter (talk | contribs) (Created page with "The decision config byte are used in Basic Decision and define the “IF” statement condition. == Versioning == This document describes the Decision Typ...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

The decision config byte are used in Basic Decision and define the “IF” statement condition.

Versioning

This document describes the Decision Type Bytes available on the Master Module CLI interface.

Master Module FW version
3.136

Action Type Bytes

Decision Byte Description
0
Check output; true if equal with data field
1
Check input; true if equal with data field
4
Check press duration of selected input; true if equal with data field
7
Check validation bit; true if equal with data field
12
Check press duration of selected input; true if shorter than data field
20
Check press duration of selected input; true if longer than data field