Config Types

From OpenMotics
Revision as of 19:50, 28 October 2013 by Pieter (talk | contribs) (Created page with "The config byte is used in in [[Basic Actions}Basic Action]] and specifies the action to be performed. == Versioning == This document describes the Action Type Bytes availabl...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

The config byte is used in in [[Basic Actions}Basic Action]] and specifies the action to be performed.

Versioning

This document describes the Action Type Bytes available on the Master Module CLI interface.

Master Module FW version
3.136

Action Type Bytes

Action Byte Description
0
Turn the selected Output off
1
Turn the selected Output on using the standard timer value specified in the output pages
2
Toggle the selected Output using the standard timer value specified in the output pages
3
Clear selected validation bit
9
Turn the selected Output on using the timer value specified in the Basic Action
10
Toggle the selected Output using the timer value specified in the Basic Action
19
Set selected validation bit
35
Toggle selected validation bit