Config Types

From OpenMotics
Revision as of 22:43, 12 November 2013 by Pieter (talk | contribs)
Jump to navigation Jump to search

The config byte is used in Simple Actions and specifies the action to be performed.

Versioning

This document describes the Action Type Bytes available on the Master Module CLI interface.

Master Module FW version
3.136

Action Type Bytes

Config Byte Description
0
Turn the selected Output off
1
Turn the selected Output on using the standard timer value specified in the output pages
2
Toggle the selected Output using the standard timer value specified in the output pages
3
Clear selected validation bit
9
Turn the selected Output on using the timer value specified in the Basic Action
10
Toggle the selected Output using the timer value specified in the Basic Action
19
Set selected validation bit
35
Toggle selected validation bit