Difference between revisions of "Config Types"

From OpenMotics
Jump to navigation Jump to search
(Created page with "The config byte is used in in [[Basic Actions}Basic Action]] and specifies the action to be performed. == Versioning == This document describes the Action Type Bytes availabl...")
 
Line 11: Line 11:
 
== Action Type Bytes ==
 
== Action Type Bytes ==
 
{| class="wikitable" width="60%"
 
{| class="wikitable" width="60%"
!Action Byte
+
! width="5%"|Action Byte
 
!Description
 
!Description
 
|-
 
|-

Revision as of 19:51, 28 October 2013

The config byte is used in in [[Basic Actions}Basic Action]] and specifies the action to be performed.

Versioning

This document describes the Action Type Bytes available on the Master Module CLI interface.

Master Module FW version
3.136

Action Type Bytes

Action Byte Description
0
Turn the selected Output off
1
Turn the selected Output on using the standard timer value specified in the output pages
2
Toggle the selected Output using the standard timer value specified in the output pages
3
Clear selected validation bit
9
Turn the selected Output on using the timer value specified in the Basic Action
10
Toggle the selected Output using the timer value specified in the Basic Action
19
Set selected validation bit
35
Toggle selected validation bit