Bootloader Error Codes

From OpenMotics
Revision as of 19:36, 14 May 2014 by Niko (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

These are the Error codes sent by the Slave (Input, Output, Temperature) Modules when in Bootloader Mode.

  • 0: Module in Bootloader and No Errors
  • 1: Error, Command not recognized
  • 2: Error, Out of Bounce
  • 3: Error, Format Not OK
  • 4: Error, CRC Not OK
  • 5: Error, Program CRC Not OK
  • 6: Send address
  • 255: Module in Live Mode and No Errors