Bootloader Error Codes

From OpenMotics
Revision as of 12:21, 14 May 2014 by Wilbert (talk | contribs) (Created page with "These are the Error code sent by the Slave (Input, Output, Temperature) Modules when in Bootloader Mode. * =0: Module in Bootloader and No Errors * =1: Error, Command not reco...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

These are the Error code sent by the Slave (Input, Output, Temperature) Modules when in Bootloader Mode.

  • =0: Module in Bootloader and No Errors
  • =1: Error, Command not recognized
  • =2: Error, Out of Bounce
  • =3: Error, Format not OK
  • =4: Error, CRC Not OK
  • =5: Error, Program CRC Not OK
  • =6: Send address
  • =255: Module in Live Mode and No Errors