Difference between revisions of "Bootloader Error Codes"

From OpenMotics
Jump to navigation Jump to search
(Created page with "These are the Error code sent by the Slave (Input, Output, Temperature) Modules when in Bootloader Mode. * =0: Module in Bootloader and No Errors * =1: Error, Command not reco...")
 
 
Line 1: Line 1:
These are the Error code sent by the Slave (Input, Output, Temperature) Modules when in Bootloader Mode.
+
These are the Error codes sent by the Slave (Input, Output, Temperature) Modules when in Bootloader Mode.
* =0: Module in Bootloader and No Errors
+
* 0: Module in Bootloader and No Errors
* =1: Error, Command not recognized
+
* 1: Error, Command not recognized
* =2: Error, Out of Bounce
+
* 2: Error, Out of Bounce
* =3: Error, Format not OK
+
* 3: Error, Format Not OK
* =4: Error, CRC Not OK
+
* 4: Error, CRC Not OK
* =5: Error, Program CRC Not OK
+
* 5: Error, Program CRC Not OK
* =6: Send address
+
* 6: Send address
* =255: Module in Live Mode and No Errors
+
* 255: Module in Live Mode and No Errors

Latest revision as of 19:36, 14 May 2014

These are the Error codes sent by the Slave (Input, Output, Temperature) Modules when in Bootloader Mode.

  • 0: Module in Bootloader and No Errors
  • 1: Error, Command not recognized
  • 2: Error, Out of Bounce
  • 3: Error, Format Not OK
  • 4: Error, CRC Not OK
  • 5: Error, Program CRC Not OK
  • 6: Send address
  • 255: Module in Live Mode and No Errors