AIO API Event Codes

Type	Action	DeviceNr.MSB	DeviceNr.LSB	Data0	Data1	Data2	Data3	Description
0	0	x.MSB	x.LSB	y	z	u.MSB	u.LSB	Output x off: This Event will be send when an output is switched off with dimmer value y, timer type z and timer value u. See Note 1.
0	1	x.MSB	x.LSB	y	z	u.MSB	u.LSB	Output x on: This Event will be send when an output is switched on with dimmer value y, timer type z and timer value u. See Note 1.
1	0	x.MSB	x.LSB	0	0	0	0	Input x Released: This Event will be send when an input is released.
1	1	x.MSB	x.LSB	0	0	0	0	Input x Pressed: This Event will be send when an input is pressed.
2	0	0	x	0	y	0	0	Temperature sensor x changed: This Event will be send when Temperature sensor x has changed, new temperature will be found in y
2	1	0	x	0	y	0	0	Humidity sensor x changed: This Event will be send when Humidity sensor x has changed, new humidity will be found in y
2	2	0	x	y.MSB	y.LSB	0	0	Brightness sensor x changed: This Event will be send when Brightness sensor x has changed, new humidity will be found in y
20	0	0	x	Mode	Setpoint	0	0	Thermostat x has changed: The Thermostat setpoint/mode has been modified by the slave device (For example the Modbus thermostat connected to the Micro CAN has an updated value set by the user)
20	1	0	x	Mode	Setpoint	0	0	Thermostat x has changed: The Thermostat setpoint/mode has been modified by the Master device (For example the user has changed the setpoint using the Mobile app)
250	0	0	Button_nr	Status	0	0	0	Front Panel Button change: The Frontpanel of the Core has 3 buttons, the Core+ has 4 buttons. When a Button is pressed (short press, longer press), an event will be send. Button_nr: 0->Setup Button, 1->Action Button, 2->CAN Power Button, 3->Select Button. Status: 0->Button released, 1->Button pressed, 2->Button pressed for 5 seconds, 3->Button pressed longer then 8 seconds.
251	Chip_Nr	Led_Blinking_25.MSB	Led_Blinking_25.LSB	Led_Blinking_50.MSB	Led_Blinking_50.LSB	Led_Blinking_75.MSB	Led_Blinking_75.LSB	Front Panel Led state change: When a Led of the Front Panel changes state (from ON to OFF or the reverse), an event message will be send. 2 led driver chips (Chip_nr 0 and 1) are present on the Front panel. The 16 bit Led_blinking_25 will indicate for the 16 leds if the led is blinking at 25% (BIT=1) or not (BIT=0), Led_blinking_50 for 50% and Led_blinking_75 for 75% ON (and thus 25% of the time OFF).
252	Chip_Nr	0	0	Led_status.MSB	Led_status.LSB	0	0	Front Panel Led state change: When a Led of the Front Panel changes state (from ON to OFF or the reverse), an event message will be send. 2 led driver chips (Chip_nr 0 and 1) are present on the Front panel. The 16 bit Led_status will indicate for 16 leds if the led is ON (BIT=1) or OFF (BIT=0).
253	0	0	Bus	Power_state	0	0	0	Power state change: When Bus=0 -> RS485 Bus, When Bus=1 -> CAN Bus, when Power_state=0 -> Bus OFF, when Power_state=1 -> Bus ON
254	0	0	0	0	0	0	0	Eeprom activate has just been fully performed and is finished
254	1	0	0	Onboard_temp	0	0	0	Update of the Onboard Main PCB temperature. Temperature is represented as a signed integer.

Notes:

• Note 1: timer type specifies which kind of timer is active for a given output and his timer value.
  • timer type=0: No timer is active
  • timer type=1: 100ms timer
  • timer type=2: 1s timer
  • timer type=3: 1m timer