Difference between revisions of "AIO API Event Codes"

Revision as of 14:34, 25 August 2019

Type	Action	DeviceNr.MSB	DeviceNr.LSB	Data0	Data1	Data2	Data3	Description
0	0	x.MSB	x.LSB	y	z	u.MSB	u.LSB	Output x off: This Event will be send when an output is switched off with dimmer value y, timer type z and timer value u. See Note 1.
0	1	x.MSB	x.LSB	y	z	u.MSB	u.LSB	Output x on: This Event will be send when an output is switched on with dimmer value y, timer type z and timer value u. See Note 1.
1	0	x.MSB	x.LSB	0	0	0	0	Input x Released: This Event will be send when an input is released.
1	1	x.MSB	x.LSB	0	0	0	0	Input x Pressed: This Event will be send when an input is pressed.
2	0	0	x	0	y	0	0	Temperature sensor x changed: This Event will be send when Temperature sensor x has changed, new temperature will be found in y
2	1	0	x	0	y	0	0	Humidity sensor x changed: This Event will be send when Humidity sensor x has changed, new humidity will be found in y
2	2	0	x	y.MSB	y.LSB	0	0	Brightness sensor x changed: This Event will be send when Brightness sensor x has changed, new humidity will be found in y
254	0	0	0	0	0	0	0	Eeprom activate has just been fully performed and is finished

Notes:

Note 1: timer type specifies which kind of timer is active for a given output and his timer value.
- timer type=0: No timer is active
- timer type=1: 100ms timer
- timer type=2: 1s timer
- timer type=3: 1m timer

@@ Line 80: / Line 80: @@
 !<div align="center">0</div>
 |Brightness sensor x changed: This Event will be send when Brightness sensor x has changed, new humidity will be found in y
+|-
+!<div align="center">254</div>
+!<div align="center">0</div>
+!<div align="center">0</div>
+!<div align="center">0</div>
+!<div align="center">0</div>
+!<div align="center">0</div>
+!<div align="center">0</div>
+!<div align="center">0</div>
+|Eeprom activate has just been fully performed and is finished
 |-
 |}