Difference between revisions of "AIO API Error Codes"

Revision as of 07:04, 27 July 2019

Type0	Type1	Data0	Data1	Data2	Data3	Description
2	0	x	-	-	-	SENSOR ERROR: Configured sensor x didn't update sensor value in the last 2 minutes
20	0	x	y	-	-	CAN ERROR: API instruction "FS" generated error: Requested Can_nr (x) is higher than configured CAN modules-1 (y)
20	1	x	-	-	-	CAN ERROR: API instruction "FS" generated error: Instr is out of range

@@ Line 31: / Line 31: @@
 !<div align="center">-</div>
 |CAN ERROR: API instruction "FS" generated error: Instr is out of range
-|-
-!<div align="center">254</div>
-!<div align="center">0</div>
-!<div align="center">x</div>
-!<div align="center">-</div>
-!<div align="center">-</div>
-!<div align="center">-</div>
-|CRC ERROR: A received API instruction (RS232) has generated a CRC error and has not been interpreted (x contains the number of the state machine generated the error)
-|-
-!<div align="center">254</div>
-!<div align="center">10</div>
-!<div align="center">x</div>
-!<div align="center">y</div>
-!<div align="center">-</div>
-!<div align="center">-</div>
-|PARAMETER ERROR: API Parameters send not in range to be an acceptable value, x and y represents the instruction used
 |-