Output Module

From OpenMotics
Jump to: navigation, search
Output 450x450.png

Technical Specifications

  • Processor: Microchip 18F45K80
  • RS485 bus connection (A and B line) – 1200 meters maximum bus length
  • Jumper for RS485 bus termination
  • Program Connector
  • 8 Bi-stable relays, 16A 230VAC, inrush current protected up to 80A per relay, reinforced insulation
  • 1 Common wire per 4 relays
  • Green relay status LEDs (8)
  • Orange status LED (1)
  • Green power LED (1)
  • Bus registering buttons (2)
  • Automatic network address generation
  • 12VDC power supply, reverse polarity protected
  • 25mA Current consumption (when relays are not changing state)
    • 80mA (for a 20ms period) Per switching action per relay when changing state, a switching action takes 20ms resulting in very low power consumption
  • DIN rail mountable, takes up 6T
  • Dimensions: 5.8cm × 10.2cm × 9cm
  • Programming language firmware: Pic Basic Pro
  • Bootloader: Yes

Firmware

Hex.png

Current version

v2-1-9
Download

Older versions

v2-1-2
Download

Help

Hardware

This module consists of the following PCBs (Printed Circuit Boards):

OMHOT
The main PCB that houses all module specific components
OMHT6
Generic top panel PCB with all front panel interface components