Output Debug Codes

When debug mode is activated (instruction debug on), the output debug code will indicate which function in the system activated a certain output.

Versioning

This document describes the Output Debug Codes available on the Gateway Module CLI interface.

Gateway Module FW version
3.140.x

Codes

Debug Code	Description
0	Thermostat pump function activated an output
1	Thermostat pump function deactivated an output
2	Thermostat function activated an output
3	Thermostat function deactivated an output
4	Toggle relay output
5	Basic Action toggled output
6	Basic Action deactivated an output
7	Simple action activated an output
8	Simple action toggled an output
9	All outputs off
10	All lights off
11	Lights off on a certain floor
12	Basic Action or CLI instruction activated an output
13	Basic Action or CLI instruction deactivated an output
14	Output indicate function
15	Timer function deactivated an output