Input Module

From OpenMotics
Jump to: navigation, search
Input 450x450.png

Technical Specifications

  • 1 Processor Microchip 18F45K80
  • 1 RS485 bus connection (A and B line) – 1200 meters maximum bus length
  • 1 Jumper for RS485 bus termination
  • Program Connector
  • 8 Digital inputs
  • 8 Green input state LEDs
  • 1 Orange status LED
  • 1 Green power LED
  • 2 Network registering buttons
  • Automatic network address generation
  • 12VDC power supply, reverse polarity protected
  • 25mA current consumption
  • DIN rail mountable, takes up 3T
  • Dimensions: 5.8cm × 5.3cm × 9cm
  • Used in conjunction with a Master module
  • The Input and Temperature modules feature have identical hardware but runs a different firmware
  • Programming language firmware: Pic Basic Pro
  • Bootloader: Yes

Firmware

Hex.png

Current version

v2-1-8
Download

Older versions

v2-1-1
Download

Help

Hardware

This module consists of the following PCBs (Printed Circuit Boards):

OMHIT
The main PCB that houses all module specific components
OMHT3
Generic top panel PCB with all front panel interface components